Vhs_x_e_v_czarne_czy_czerwone_prod_majki_offici... Direct

: Use a flat-head screwdriver or your finger to manually turn one of the spools from the bottom to ensure the tape moves smoothly across the path without snagging.

: Flip the cassette over and replace the five standard Phillips-head screws. vhs_x_e_v_czarne_czy_czerwone_prod_majki_offici...

: Align the top half of the shell with the bottom. It should click into place without resistance. If there is a gap, the tape or a plastic lever is likely misaligned. : Use a flat-head screwdriver or your finger

: Ensure the spring-loaded brake lever (the piece that stops the reels from spinning freely) is pushed back so the spools can sit flat. It should click into place without resistance

: This is the most critical step. Pull a slack length of tape and guide it through the "tape path" at the front of the cassette. It must go behind the two plastic guide posts and over the small rollers at each corner. Position the Springs and Locks :

For a visual walkthrough, you can find detailed repair guides on Legacybox or watch a spool-swapping tutorial on YouTube .