Sew over the teeth several times at the end to create a sturdy bar tack.
Ensure the other end of the tape teeth are aligned, but with one side slightly longer (by about 12one-half inch) to facilitate the zipper pull engagement. 2. Install the Slider (The "Zipper Jig" Method) StyxHips 20 Clipszip
Pull the zipper tape toward you. It will "click" or slide onto the tape, joining the teeth. Remove: Pull the fully attached slider off the jig. 3. Secure the Zipper (Stopping) To prevent the zipper pull from sliding off the end: Sew over the teeth several times at the