Jensen A220 Amp Manual [ 2024 ]

Connect directly to the positive battery terminal. A fuse must be installed on this wire within 18 inches of the battery to protect the vehicle's electrical system.

Capable of outputting 250 Watts into a 4-ohm load. Jensen A220 Amp Manual

Connect this to the head unit’s amplifier turn-on lead or power antenna output to ensure the amp powers on with the radio. Connect directly to the positive battery terminal

Use the Low-level (RCA) inputs for the best audio performance. If your factory head unit lacks RCA outputs, high-level speaker wire inputs can be used. Safety & Maintenance Tips owner's manual - Jensen Mobile Connect this to the head unit’s amplifier turn-on

Utilizes MOSFET technology for efficient power delivery. Installation & Wiring Guide

Stable down to 2 ohms in stereo mode ; however, a minimum of 4 ohms is recommended when bridged to prevent damage.

While official modern documentation is limited, historical data and expert overviews highlight the following specifications: Rated at 100W x 2 channels (Max).