Plug the TV back in while continuing to hold the Power button.
Place the extracted .bin file in the root directory of the USB (not inside any folder). Flash the TV: Unplug the TV from the power outlet. Insert the USB drive into the TV's USB port. Plug the TV back in while continuing to
Based on the technical identifiers provided, this firmware is compatible with the following hardware configuration: Condor S40T5110 Mainboard/Chassis: MT56FD (or MT5661 chipset family) Panel Model: LVF400SSDE (40-inch LED panel) Software Version: V33 (or MAD2LG / T56FT04 LKF1Vxxx series) Where to Download Insert the USB drive into the TV's USB port
Format a USB 2.0 flash drive (8GB or less) to FAT32 . Installing the wrong firmware version for your specific
Release the button once the "Software Upgrading" or progress bar appears.
Installing the wrong firmware version for your specific panel (e.g., using a V33 file on a V32 hardware revision) can result in a mirrored image, distorted colors, or a complete "brick" of the device. Always verify the panel number inside the TV casing before flashing.
Use WinRAR or 7-Zip to extract the .rar file. You should see a file named allupgrade_56fd_xxx.bin or similar.