721-.rar

If you are using the USB connection, you must install the proper drivers to create a virtual COM port.

: Use the arrow keys on the cutter's control panel to move the blade to your starting point and press "Origin" or "Local" to set the zero point.

: Always use the "Test" button on the cutter or the "Area Test" in your software to ensure the carriage moves correctly before wasting material. Vinyl U.S. Cutter set up MH 721-MK2 28" 721-.rar

Place the holder into the carriage arm and tighten the locking knob.

Insert the blade into the blade holder (cartridge) and adjust the cap so only a tiny sliver of the blade (about half the thickness of a credit card) is visible. If you are using the USB connection, you

: You may need FTDI VCP drivers available from FTDI Chip to allow the OS to send commands via USB. 3. Software Configuration

recommend using a serial connection or a high-quality adapter like the for better reliability. 2. Driver Installation Vinyl U

model and choose "Direct USB" or "Direct COM" depending on your cable. 4. Running Your First Cut